|
Also, take a look at our
eBay shop
This is just a small sample of what we carry!
If you don't see what you're looking for here,
Give us a Bell!
Hi, I'm Rex and I've been around since the earth cooled! If FS1e's had been available when I was in my teens,
I probably would have had several. However, all we had to work on back then, were the 50cc motors attached to cycles!
But I still managed to build myself a great foundation in small, 2-stroke engines, until the FIzzy was introduced in the UK.
At that time, I was working in a Yamaha dealership in Sunny Leicester, and soon fell in love with this awesome piece of engineering!
So, let my experience help you to overcome any problem you might have with your FS1E.
As well as our usual, cheerful technical advice, why not check out the parts below? You might just find exactly
what you need. And keep coming back -- we're adding new parts all the time!
(If you don't see it listed below, contact us -- email us at sales@rexcauntracing.com or tele/fax +44 (0)1455 846963
-- and we'll do everything we can to obtain it for you right away!) |
|
|
This seal is located behind the circlip and plain washer behind the gear shaft. |
 |
For ALL FS1's & FS1E's
|
| Price : |
| FS1/FS1E Gear Shaft Oil Seal |
£1.97 each plus deliv. & VAT* |
|
|
Comes complete with adjuster and has multi-strand inner wire, exactly the same as original,
which is very flexible. |
 |
For ALL FS1's
|
| Price : |
| FS1E Pre-AutoLube Throttle Cable |
£6.20 each plus deliv. & VAT* |
|
|
Rim Tape to protect your inner tube from damage by spoke heads |
 |
For ALL FS1's & FS1E's
|
| Price : |
| FS1/FS1E Rim Tape |
£0.98 each plus deliv. & VAT* |
|
|
This set fits all models of the FS1. Comes complete with cylinder base gasket,
cylinder head gasket, exhaust gasket, clutch cover gasket, carburettor cover gasket,and
even the float chamber gasket. (Includes reed valve gasket for those of you with the
Dutch model.) An excellent deal for this price! |
 |
For ALL FS1's
|
| Price : |
| FS1E Complete Gasket Set |
£4.05 complete set of 7 plus deliv. & VAT* |
|
|
Two Specially selected crankshaft seals - 1 for Timing Side (20mm X 35mm X 7mm) and 1 for
Disc Valve Cover (28mm X 47mm X 7mm) |
 |
For ALL FS1's
|
| Price : |
| FS1E Left & Right Crankshaft Seals |
£4.50 complete set of 2 plus deliv. & VAT* |
|
|
Carburettor for FS1E with cable choke mechanism. Accurately sized to fit your inlet manifold, with
extra O-ring seal to totally eliminate air leaks. |
 |
For Early FS1E's (1972-1977)
|
| Price : |
| FS1E Carburettor |
£34.97 each plus deliv. & VAT* |
|
|
Quality replacement for your FS1. Unrestricted version. Includes baffle and exhaust port nut. |
 |
For ALL FS1's
|
| Price : |
| FS1 Complete Exhaust System |
£29.97 each plus deliv. & VAT* |
|
|
Original Yamaha Equipment, this bearing is as fitted by Yamaha to all FS1's. The cage is
specially treated, and internal clearance is carefully designed for longevity and smooth running. |
 |
For ALL FS1's
|
| Price : |
| FS1 Timing Side Main Bearing |
£7.56 plus deliv. & VAT*; |
|
|
This bearing is original Yamaha, as fitted to all FS1's. The internal clearance is carefully designed for longevity and smooth running. |
 |
For ALL FS1's
|
| Price : |
| FS1 Drive Side Main Bearing |
£5.89 plus deliv. & VAT*; |
|
|
When you're doing your Fizzy rebuild, this is the advised sealer for your crankcases.
Exact product as used by Yamaha to build the original FS1's. |
 |
Ideal for all your jointing requirements
For Trade or Bulk-Quantity Discount, contact us
|
| Price : |
| Three Bond Gasket Sealer |
SPECIAL £9.00 plus deliv. & VAT*; |
|
|
Comes complete with fixing bolt and kickstart rubber. |
 |
For the FS1M
|
| Price : |
| FS1M Kickstart Lever |
£10.95 each plus deliv. & VAT* |
|
|
A very vulnerable part on your FS1 is the clutch pushrod. We've all had the chain
break or come off, so it's vital to keep your chain in good condition, and it might be wise
to carry a spare pushrod and oil seal -- just in case!. |
 |
For ALL Yamaha FS1's
|
| Price : |
| FS1E Pushrod and Oil Seal |
£3.74 each plus deliv. & VAT* |
|
|
If you have a leak from your clutch pushrod oil seal, and the pushrod is smooth and without any
grooves, you'll only need the oil seal, saving the added expense of unnecessarily purchasing the pushrod. |
 |
For ALL Yamaha FS1's
|
| Price : |
| FS1 Clutch Pushrod Oil Seal |
£1.97 each plus deliv. & VAT* |
|
|
After a considerable time, you may experience oil leaking by the gear box sprocket.
This means you need to replace the oil seal, a fairly easy job. |
 |
For ALL FS1's
|
| Price : |
| FS1 Gearbox Output Oil Seal |
£2.40 each plus VAT* |
|
|
This is for all you quicker guys (and gals) who are looking for a bit more speed
and are looking to gear up. Ours has one tooth more than standard! |
 |
Standard 14-Tooth or (1 Tooth over Standard, for Gearing Up) 15-Tooth Gear Box Sprocket, for ALL Yamaha FS1's
|
| Price : |
| FS1 Gearbox Sprocket |
£3.27 each plus deliv. & VAT* |
|
|
Specially selected for quality and smooth running at a very reasonable price. |
 |
For ALL FS1's
|
| Price : |
| FS1 Gearbox Bearing for Output Shaft |
£5.89 each plus deliv. & VAT* |
|
|
Comes with original metal seal. |
 |
For ALL FS1's
|
| Price : |
| FS1 Gearbox Bearing for Input Shaft |
£5.67 each plus deliv. & VAT* |
|
|
You may find that you have a leak from the kickstart. After removing the clutch casing,
you can easily replace this seal. |
 |
For ALL FS1's
|
| Price : |
| FS1 Kickstart Shaft Oil Seal |
£2.47 each plus deliv. & VAT* |
|
| |
| * VAT for UK and EU only. |